This is the URL of the RTSP stream: Main Stream: rtsp://10.1.1.11/Streaming/Channels/101 To integrate the camera we will use in this case the RTSP, since it will always be possible to integrate the camera, unlike Onvif that due to the difference in versions sometimes it will be possible and sometimes not In this example, we will use the camera IP address 10.1.1.11 When the IP range of the local area network (LAN) is the same range, you must change the IP rangeĪdding the camera to the NVR via the Web interface ![]() Open the web browser and enter the IP address of the NVR with the port used. After activation change the IP address and we have to use one of the ranges 10.1.1.xxxĬonfirm with the password that was used to activate the camera.ġ. Open the SADP tool on the PC to activate the cameraĢ. This can be done through the web interface or a monitor connected to the NVR.ġ. To enable and change the IP address of the Safire camera, you need a computer and the SADP tool.įirst, write down the internal IP address range of the NVR.In this article, we are going to explain how to add a Safire PoE camera on an X-Security NVR ![]() This test was performed with an XS-NVR3216A-4K16P-1FACE recorder firmware version V4.002.0000000.0, Build Date:
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |